Welcome to Naipu Mining Machinery

email [email protected]

Safety Instruction of Slurry Pump

Safety Instruction of Slurry Pump

September 28, 2015 04:00:17 PM

As a rotating machinery and also a pressure vessel, all relevant safety precautions and procedures for a slurry pump should be observed during pump installation, operation and maintenance.

Where auxiliary equipment is associated with a slurry pump (such as motors, drive belts, drive couplings, speed reducers, variable speed drives, etc), all relevant instruction manuals should be consulted, and recommended procedures implemented, during installation, operation and maintenance of the slurry pump system.

Check drive motor rotation of slurry pump prior to fitting of drive belts or couplings. Incorrect motor rotation may cause personnel injury or equipment damage.

Do not operate the slurry pump beyond the operating duty specified in the sales conditions without permission, or it may result in injury to personnel or equipment damage.

Do not operate the slurry pump with zero or very low flowrate. Failure to observe this warning could result in vaporization of the pumped fluid, with generation of very high pressures. Injury to personnel or damage to equipment may result from such action.

A slurry pump internally vacuumed shall be isolated for maintenance or operation. Insufficient isolation may result in a flying wheelof the impeller, causing injury to personnel or damage to equipment.

Inquiry Now

Pre: Slurry Pump Operation Manual

Next: Assembly Instruction and Manual for Rubber-lined Slurry Pump

Consult Online

Consult Online

24-hour service online
Send Email

Email

[email protected]
Call Us

Call Us

86-21-67268186
Join us

Join Us

Realize our dreams together!

Follow Us

t f i y

Copyright © 2008 The Naipu Mining Machinery and New Materials Co., Ltd all rights reserved