Welcome to Naipu Mining Machinery

email [email protected]

40NZJV Slurry Pump 40NZJV pump Naipu 40NZJV
40NZJV Slurry Pump 40NZJV pump Naipu 40NZJV

40NZJV-R Slurry Pump

Slurry Pump type: 40NZJV-M
Inlet diameter: 80mm; Outlet diameter: 40mm; Bracket code: HCV/15 KW; Max. rev.: 3000rpm
Impeller material: elast; liner material: elast; Blade diameter: 195mm; Max. diameter of impeller: 195mm; part code of impeller: V-C04015-R
Impeller type: OPEN; Blade no.: 5; max. passing diameter: 12mm.

GLAND SEAL: pump efficiency changes with the type of gland seal. Pump efficiency of expeller seal is about 5% lower than that of gland seal. Different structure of impeller leads to different pump efficiency. As we are always improving the pump performance, changes of performance curve may not be informed timely.

Overview
Product Model: 40NZJV-R material: rubber
Rev. Flow Head Efficiency Shaft power KW Drive Motor Power
rpm m3/h m % Sm= 1.0 Sm = 1.2 Sm = 1.4 mode KW
1000 7.3 5.6 30 0.37 0.44 0.51 BD Y90S-4 1.1
1000 13.6 4.8 37 0.48 0.57 0.67    
1000 17.3 4.1 40 0.49 0.58 0.68    
1200 8.7 8 30 0.64 0.76 0.89 BD Y90S-4 1.1
1200 16.4 6.8 37 0.82 0.99 1.15 Y90L-4 1.5
1200 20.7 6 40 0.84 1.01 1.17    
1400 10.2 10.9 30 1.01 1.21 1.41 BD Y90L-4 1.5
1400 19.1 9.3 37 1.31 1.57 1.83 Y100L1-4 2.2
1400 24.2 8.1 40 1.33 1.6 1.86 Y100L2-4 3
1420 10.3 11.2 30 1.05 1.26 1.47 DC Y90L-4 1.5
1420 19.4 9.6 37 1.36 1.64 1.91 Y100L1-4 2.2
1420 24.5 8.3 40 1.39 1.67 1.95 Y100L2-4 3
1500 10.9 12.6 30 1.24 1.49 1.74 BD Y100L1-4 2.2
1500 20.5 10.7 37 1.61 1.93 2.25 Y100L2-4 3
1500 25.9 9.3 40 1.64 1.97 2.29 Y112M-4 4
1600 11.6 14.3 30 1.51 1.81 2.11 BD Y100L1-4 2.2
1600 21.8 12.2 37 1.95 2.34 2.73 Y100L2-4 3
1600 27.6 10.6 40 1.99 2.39 2.78 Y112M-4 4
1700 12.4 16.1 30 1.81 2.17 2.53 BD Y100L2-4 3
1700 23.2 13.7 37 2.34 2.81 3.28 Y112M-4 4
1700 29.4 11.9 40 2.38 2.86 3.34 Y132S-4 5.5
1800 13.1 18.1 30 2.15 2.57 3 BD Y100L-2 3
1800 24.5 15.4 37 2.78 3.33 3.89 Y112M-2 4
1800 31.1 13.4 40 2.83 3.4 3.96 Y132S1-2 5.5
1900 13.8 20.1 30 2.52 3.03 3.53 BD Y112M-2 4
1900 25.9 17.2 37 3.27 3.92 4.57 Y132S1-2 5.5
1900 32.8 14.9 40 3.33 3.99 4.66 Y132S2-2 7.5
2000 14.5 22.3 30 2.94 3.53 4.12 BD Y112M-2 4
2000 27.3 19 37 3.81 4.57 5.34 Y132S1-2 5.5
2000 34.5 16.5 40 3.88 4.66 5.44 Y132S2-2 7.5
2100 15.3 24.6 30 3.41 4.09 4.77 BD Y132S1-2 5.5
2100 28.6 21 37 4.41 5.29 6.18 Y132S2-2 7.5
2100 36.3 18.2 40 4.49 5.39 6.29 Y160M1-2 11
2200 16 27 30 3.92 4.7 5.48 BD Y132S1-2 5.5
2200 30 23 37 5.07 6.09 7.1 Y132S2-2 7.5
2200 38 20 40 5.17 6.2 7.24 Y160M1-2 11
40NZJV

*The above power value refers to the limiting power which the corresponding shaft bearing can transfer, not the power of matched motor. Max. rev. in the curve refers to the limiting working rev. of the pump. If the pump is applied above the limiting rev., please consult the pump company of Naipu Group (NAIPU SLURRY PUMP DIVISION). This performance curve is drawn from the test result which is done according to the Grade C Standard of ISO2548, with clear water as transferring media. If the transferring media is not clear water, please take the influences of density and viscosity of media and the influence of solid in to consideration. IF necessary, you can consult the pump company of Naipu Group (NAIPU SLURRY PUMP DIVISION).

    Case

  • Mongolia slurry pump

    Naipu slurry pump 550 used in CNGG Inner Mongolia Mining Co., Ltd

  • cyclone feed pump

    3 sets of Naipu cyclone feed pumps used in Yinchun Luming Mining plants.

  • 450 slurry pumps

    Naipu 450 slurry pumps were used in primary mill classifying plants in Tongguan Mining.

  • gold mine slurry pump

    Naipu supply 16 sets of 450 slurry pump for KSO and SABC circuit mill.

Consult Online

Consult Online

24-hour service online
Send Email

Email

[email protected]
Call Us

Call Us

86-21-67268186
Join us

Join Us

Realize our dreams together!

Follow Us

t f i y

Copyright © 2008 The Naipu Mining Machinery and New Materials Co., Ltd all rights reserved