Welcome to Naipu Mining Machinery

email [email protected]

vertical double-suction slurry pump NZJV slurry pump for sale Naipu NZJV slurry pump
vertical double-suction slurry pump NZJV slurry pump for sale Naipu NZJV slurry pump

NZJV Vertical Double-suction Slurry Pump

Vertical double suction slurry pump is solid and anti-corrosive. It is suitable for transporting abrasive or corrosive slurries. The pump is a submersible slurry pump so it is usually put into a pool or a pit when working. Wear resistant sludge pump is so efficient that its efficiency can reach 59.14%. Its lifting height ranges from 12.10 m to 16.2 m (as showed in the table). Our vertical double suction slurry pump is broadly applied in industries including metallurgy, mining, coal and construction materials. Naipu NZJV series slurry pumps are equivalent to Warman SP series pumps.

Overview

Parameters of Design Duty Points of NZJV Series Slurry Pump

Design duty points refer to the rated point designated at the beginning of design of a slurry pump which is usually the highest efficiency point. Working range is increased by adjusting the speed of an NZJV vertical double suction slurry pump practically.

Model FLOWRATE Q(m3/h) HEAD H(m) SPEED n(r/min) Drive Arrangement Blades
No.
Inlet Diameter(mm) Outlet
Diameter(mm)
Max.
Diameter(mm)
40NZJV-M 7.4-43 4.3-27.4 1000-2200 BD,DC 5 80 40 195
40NZJV-R 7.3-38 4.1-27 1000-2200 BD,DC 5 80 40 195
65NZJV-M 20.1-100 5.2-30.8 700-1500 BD,DC 5 120 65 290
65NZJV-R 21-98 5.4-31.1 700-1500 BD,DC 5 120 65 290
100NZJV-M 42-259.2 5.2-36 500-1200 BD,DC 5 175 100 390
100NZJV-R 43.2-259.2 7.7-37 600-1200 BD,DC 5 175 100 390
150NZJV-M 117-500 7.3-35.7 500-1000 BD,DC 5 240 150 480
150NZJV-R 90-500 6.8-35 500-1000 BD,DC 5 240 150 480
200NZJV-M 175.7-700 6.7-27.5 400-740 BD,DC 5 250 200 550
250NZJV-M 251.4-900 8.2-29 400-700 BD,DC 5 260 250 605
300NZJV-M 369.2-1200 8.0-28 400-650 BD,DC 5 300 300 641

Classification

NZJV vertical double suction slurry pump is a vertical centrifugal pump which works under the liquid level. The pump can be divided into NZJA-R(rubber impeller) and NZJA-M(metal impeller) based on the material of impeller. The range of discharge size is 40-300mm; flow rate range is 6-900m3/h and head is 5-34m.

Application

Vertical slurry pump is widely used in delivering corrosive & coarse particles and high-density slurries. It is often applied in metallurgy, mine, coal, electricity, building material, environmental protection, etc. Additionally, our slurry pumps are good replacements for Warman slurry pumps, Metso Slurry Pump, Goulds slurry pumps, etc.
 

Advantages

  • Multistage tandem technology makes vertical double suction slurry pump available for long-distance transportation.
  • Wetted parts enjoy long service life and have various types to meet the demand of different working conditions.
  • Wear resistant sludge pump has features of high performance cost ratio, unique anti-wear and high efficiency.
  • Vertical double suction slurry pump is easy to maintain and repair.
  • High wear resisting rubber is able to absorb noise and vibration. And it can make use of self- resilience to absorb the shock of solid particles.
  • The rubber is light and takes little time to change.
  • Vertical double suction slurry pump adopts enlarged flow cross section design. EDEM discrete finite element analysis software is used in designing the pump.
  • Components structures are optimized and the design of cross section velocity makes abrasion of wear resistant sludge pump uniform.
  • Naipu Company also provides pump selecting service as showed in the following picture.

Operation

  • Users are supposed to install, operate and maintain vertical double suction slurry pump according to the regulated security measures.
  • The auxiliary devices like motor and belt drive device also have to follow the security measures and other regulations in installation, operation and maintenance.
  • Maintenance of Wear Resistant Sludge Pump

  • Make sure to adjust and replace impeller regularly.
  • Spare vertical double suction slurry pump should be turned manually for 1/4 circle per week if it is not used for a long time. This can make roller bearing under load.
  • Lubricate bearings.

Customer Services

Attention

According to the types of minerals and slurry, choose the most suitable pump.

Packaging and Shipping

  • Vertical double suction slurry pump should be packaged in iron cases.
  • Shipping ways are by sea and land transportation.

Payment and Delivery Time

  • L/C and T/T are accepted.
  • Wear resistant sludge pump will be delivered within 30 to 60 days after the receipt of down payment.

After-Sale Service

Field installation and maintenance services will not be offered unless the purchase orders of vertical double suction slurry pumps reach a certain amount.

    Case

  • Mongolia slurry pump

    Naipu slurry pump 550 used in CNGG Inner Mongolia Mining Co., Ltd

  • cyclone feed pump

    3 sets of Naipu cyclone feed pumps used in Yinchun Luming Mining plants.

  • 450 slurry pumps

    Naipu 450 slurry pumps were used in primary mill classifying plants in Tongguan Mining.

  • gold mine slurry pump

    Naipu supply 16 sets of 450 slurry pump for KSO and SABC circuit mill.

Consult Online

Consult Online

24-hour service online
Send Email

Email

[email protected]
Call Us

Call Us

86-21-67268186
Join us

Join Us

Realize our dreams together!

Follow Us

t f i y

Copyright © 2008 The Naipu Mining Machinery and New Materials Co., Ltd all rights reserved